Bathroom mirror installation tips

1. Installation height of bathroom mirror

In the bathroom it is to stand to look at a mirror commonly, below bathroom mirror edge is apart from ground due at least 135 centimeters, if the height difference between family member is bigger, can rise and fall again adjust. Try to put your face in the middle of the mirror to get a better image. In general, keep the center of the mirror 160 to 165 centimeters off the ground.

2. Fixing method of bathroom mirror

First measure the distance of the hook behind the mirror, and then make a mark on the wall and make holes in the mark. If it is a ceramic tile wall, you need to first drill the ceramic tile with a glass bit, then use a percussion drill or an electric hammer to hit 3CM, put the hole into a plastic expansion tube, then twist a 3CM self-tapping screw, leave 0.5cm outside, and hang up the mirror.

3. Protect the wall by punching holes

When installing, pay attention not to destroy the wall, especially hanging the mirror on the ceramic tile wall, try to choose the hole in the material seam. Drilling is done in the form of a water drill.

4. The fixing method of glass glue should be known

If you are using glass glue to fix the mirror, do not use acid glass glue, should choose neutral glue, acid glass glue will usually react with the material on the back of the mirror, resulting in speckled mirror. Before applying the gel, do a compatibility test to see whether the gel will dissolve with the material, and use a special mirror gel for a better effect.

5. Bathroom mirror lamp installation

Bathroom mirror should have good lamplight to cooperate commonly, because this mirror headlamp or the lamp of mirror flank is very necessary. When installing mirror headlights, take care to avoid glare. It is recommended to install lampshades or select lamps with frosted glass surfaces.