Do Not Ignore The Installation, Pay Attention To The Reasonable Installation Of Bathroom Mirrors

After choosing a bathroom mirror, many people think that everything is fine. Need to know, and pay attention to the installation of bathroom mirrors. The quality of the bathroom mirror installation has a great influence on the bathroom wall and the use and purchase. Let's take a look at the precautions for bathroom mirror installation.

Bathroom mirror installation height

In the bathroom, you usually stand and look in the mirror. The bottom edge of the bathroom mirror should be at least 135 cm from the ground. If the height difference between family members is relatively large, you can adjust it up and down. Try to keep your face in the middle of the mirror, so that the imaging effect is better. In general, it is better to keep the center of the mirror at 160-165 cm above the ground.

Bathroom mirror fixing method

First measure the distance between the hooks behind the mirror, and then make a mark on the wall and punch holes in the mark. If it is a tiled wall, you need to drill the tile with a glass drill bit, then use an impact drill or electric hammer to drive into 3CM, after drilling the hole, put it into the plastic expansion tube, and then screw on the 3CM self-tapping screw, leaving 0.5CM outside, Then hang the mirror.

Pay attention to protect the wall

When installing, be careful not to damage the wall, especially if you hang mirrors on the tile wall, try to punch holes at the joints of the materials. Drilling is best done with rhinestones.

Glass glue fixing method needs to know

If you use glass glue to fix the mirror, be careful not to use acid glass glue, you should choose neutral glue, acid glass glue will usually react with the material on the back of the mirror, causing mottled mirror surface. Before applying the glue, it is best to do a compatibility test to see if the glue is compatible with the material. It is best to use a special mirror glue.

Bathroom mirror mirror lamp installation

Bathroom mirrors generally need to have good lighting, so mirror headlights or mirror side lights are very necessary. When installing mirror headlights, pay attention to prevent glare. It is recommended to install a lampshade, or choose a lamp with a frosted glass surface.